窜厂奥系列振动给料机主要用于粗碎破碎机前连续、均匀给料，同时可筛分细料，使破碎机能力增大。该机采用双偏心轴激振器的结构特点，保证设备能承受大块物料下落的冲击，给料能力大。在生产流程中可以把块状、颗粒状物料从贮料仓中均匀、定时、连续地送到受料装置中去，从而防止受料装置因进料不均而产生死机的现象，延长了设备使用寿命。给料机可分为钢板结构和篦条结构，钢板结构的给料机多用于砂石料生产线，将物料全部均匀地送入破碎设备；篦条结构的给料机可对物料进行粗筛分，使系统在配制上更经济合理，在破碎筛分中已作为必不可少的设备。因而该机广泛应用于冶金、煤矿、选矿、建材、化工、磨料等行业的破碎、筛分联合设备中。
特点及优势
1、直线运动轨迹，振动平稳；
2、特殊栅条设计，可防止物料堵塞；
3、栅条间隙可调。该系列振动给料机工作可靠、噪声低、耗能小、无冲料现象、寿命长、维护保养方便、重量轻、体积小、设备调节安装方便、综合性能好。当采用封闭式结构机身时可防止粉尘污染。
工作原理
窜厂奥系列振动给料机是由给料槽体、激振器、弹簧支座、传动装置等组成。槽体振动给料的振动源是激振器，激振器是由两根偏心轴(主、被动)和齿轮副组成，由电动机通过叁角带驱动主动轴，再由主动轴上齿轮啮合被动轴转动，主、被动轴同时反向旋转，槽体振动，使物料连续不断流动，达到输送物料的目的。
英文如下：
ZSW series vibrating feeder is mainly used for rough crusher continuous, uniform feeding, while screening fine material, makes the crusher capacity increase. The machine adopts double eccentric shaft vibration exciter structure characteristics, to ensure that equipment can withstand the bulk material falling impact, feeding capacity. In the production process to the massive, granular materials from the storage bin in uniform, timing, continuously fed to the feeding device, thereby preventing the feeding device for feeding caused the phenomenon of death, prolonging the service life of the equipment. Feeder can be divided into the steel structure and the grid structure, the steel structure of the feeder used for sand stone production line, will all the materials uniformly into broken equipment; the grate structure of the feeder can be screening of rough materials, make the system in preparation on more economic and reasonable, in crushing and screening has as essential equipment. The machine is widely used in metallurgy, mining, mineral processing, building materials, chemical industry, abrasive and other industries crushing, screening equipment.
Features and advantages
1 linear motion, stable vibration;
2 the design of special grid, which can prevent the material jam;
3 bars with adjustable clearance. This series of vibrating feeder is reliable, low noise, low energy consumption, without the phenomenon of red material, long service life, convenient maintenance, light weight, small volume, convenient installation, equipment, good comprehensive performance. When the body when using a closed structure to prevent dust pollution.
Working principle
ZSW series vibrating feeder is composed of feeding trough, exciter, spring seat, a transmission part. Body vibration feeder vibration source is vibrator, vibrator is composed of two eccentric shafts (main, passive ) and a gear pair, by the motor through the belt drive shaft, driving shaft gear from the driven shaft to rotate, the main driven shaft at the same time, reverse rotation, body vibration, so the material can continuously constant flow, achieve the purpose of conveying material.
(图/文www.changrong-jx.com)
|
